FREE SHIPPING ON ORDERS OVER £100
A conversion kit is the cheap way to get most of the...
A conversion kit is the cheap way to get most of the benefit of a new barrow without buying one. Because you already have the frame, you are only paying for the part that changes how it handles.Rear swivel wheel kits replace fixed rear legs with castoring wheels, so the barrow rolls on all wheels instead of being lifted and balanced , a significant difference on long walks and for anyone with a bad back or shoulder. The handled version adds a push bar for full control. Kits bolt on using existing fixing points and need no modification to the frame. Check which kit suits your model before ordering.
The wheel is the part that wears out, and it is also...
The wheel is the part that wears out, and it is also the cheapest upgrade you can make to how a barrow pushes. A wider tyre spreads the load and stops you sinking on soft ground; a puncture-proof solid EVA wheel removes the one failure that genuinely ruins a session.We stock replacement wheels, pneumatic tyres, inner tubes and bearings across the range, including wide Fat-Boy wheels, Tri-Porter rear wheels and 20mm Power Porter wheels. Bore sizes and axle diameters differ between models and generations , measure your axle and check the bore listed on the part before ordering.
Electric barrows are simple systems with a small number of parts that...
Electric barrows are simple systems with a small number of parts that wear: the battery, the charger, the motor, the control unit and the cable that joins them. All of them are replaceable, and none of them means the end of the barrow.We hold genuine batteries, battery bags, chargers, drive motors, hand controllers, control units and centre cables across the Power Porter range, including the MK8 and Xtreme. Connection types and voltages changed between generations , MK8 batteries, for example, fit in series to supply 24V to the motor , so check your connector type and voltage against the part listing before ordering.
Accessories are how a barrow stops being a generic frame and starts...
Accessories are how a barrow stops being a generic frame and starts being yours. Brackets mount buckets, bottles and bank sticks where you want them. Straps and bungees lock a load down so nothing shifts on rutted tracks. Lights clamp to the frame for early starts and late pack-downs.Everything here is designed around Carp Porter fittings, so it clamps to the right tube diameters and does not interfere with folding, the wheel or the luggage. If you are adding storage rather than fittings, the barrow bags and luggage range is the place to start.
Barrow luggage is what turns a frame into a system. Our bags...
Barrow luggage is what turns a frame into a system. Our bags are cut to fit Carp Porter barrows exactly , no straps hanging loose, no wasted space, no bag fouling the wheel or the legs.Drop-in bags fill the space beneath the frame and keep weight low where it helps balance most. Front bags sit ahead of the axle for bulky, quick-access kit like cookware and clothing. Side bags and add-on storage take the overflow, and handlebar and tidy bags use the space between the handles that most anglers waste. All of it is built from heavy waterproof material with drainage holes, reinforced carry handles and secure fixings, so it stays put on rough ground and dries out after a wet session.
A barrow cover earns its money on the walk back. Rain, mud...
A barrow cover earns its money on the walk back. Rain, mud thrown off the wheel and spray off long grass all end up on your luggage, and a fitted cover keeps it off both your kit and your car boot.Our covers are cut to the dimensions of Carp Porter frames and luggage rather than being a generic throw-over, so they sit tight and do not flap or catch. Waterproof material, elasticated fixing and a pack-down size small enough to live permanently in a tidy bag. Sized options are available to suit standard and extended frames.
Carp Porter has been building carp fishing barrows in England for over...
Carp Porter has been building carp fishing barrows in England for over twenty years, and the range runs from a stripped-back day-session barrow through to a fully powered load hauler. Every frame is engineered around the same three priorities: balance under a heavy load, stability on soft or uneven bank, and a pack-down size that still fits in a car boot.The range splits two ways. Unpowered carp barrows you push yourself , lighter, simpler and quicker to strip down. Power Porters drive the front wheel from a 24V motor, taking the effort out of long walks, muddy tracks and steep banks. Either way the frame is a platform: barrow bags, covers, brackets and conversion kits let you build it around the way you actually fish.
Carp Porter barrows are built to be repaired rather than replaced, and...
Carp Porter barrows are built to be repaired rather than replaced, and we hold genuine replacement parts for models going back years. Wheels, tyres, inner tubes, bearings, axle shafts and supports, frames, handles, rear legs, brakes, drop-in bags and bungees , all to original specification.Parts are listed by the model they fit, including the MK2 Carp-Porter, MK2 Fat Boy, MK2 Tri-Porter, Big Boy Tri-Porter, Porter-Lite, MK4S, MK8 Power-Porter and Xtreme Power-Porter. Dimensions vary between generations of the same model, so check the measurement given on the part against yours before ordering. If you are unsure which part you need, get in touch before you buy.
A drop-in bag sits inside the barrow frame and uses the dead...
A drop-in bag sits inside the barrow frame and uses the dead space underneath, which keeps the heaviest part of your load low and central , the single biggest thing you can do for barrow balance.The Standard Drop-In Bag opens from the top and both sides for quick access, with twin reinforced carry handles and drainage holes for wet sessions. The Deluxe version adds two full side pockets so you can separate the kit you need first from the kit you need last. Both secure with an adjustable Velcro strap so nothing shifts on rough ground. Available in Green and Dark Kamo.
The Glider is the flagship. An extended base, fully adjustable multi-point configuration...
The Glider is the flagship. An extended base, fully adjustable multi-point configuration and twin rear swivel wheels that let it turn tight corners and track down narrow paths in a way no fixed-leg barrow can. If you carry a week’s worth of tackle, this is the frame built for it.Longest in the range at 110cm standard and 140cm extended, 61cm wide extending to 90cm, packing down to 110cm x 61cm. Runs the 2025 drive control unit with 20kHz quiet operation, slow start and stop, instant stop, adjustable speed dial, three reverse speeds and quick-release connectors. Supplied with battery and charger, and takes the full range of side and front bags.
Luggage sized specifically for the MK8 Power-Porter frame. Because the MK8 has...
Luggage sized specifically for the MK8 Power-Porter frame. Because the MK8 has its own frame dimensions and battery position, generic barrow bags either waste space or foul the electrics , these do neither.The range covers drop-in bags for the under-frame space, front bags for bulky quick-access kit and side bags for overflow, in Green, Dark Kamo and DPM. If you are replacing a worn bag rather than adding one, the same items are listed in the spares section under the MK8.
The 2025 range is the biggest change to Carp Porter since the...
The 2025 range is the biggest change to Carp Porter since the MK2. Four frames , Stealth, Roamer, Trident and Glider , covering everything from a compact day-session barrow to a twin-swivel-wheel hauler, each available with matched luggage and, on three of them, a Power Porter drive.Behind it sits a completely rebuilt electronics package: a new drive control unit developed with a UK electronics specialist, running at 20kHz for quieter operation, with slow start and stop, instant stop, an adjustable speed dial, three reverse speeds and quick-release cable connectors. Frames, wheels and luggage fittings are shared across the range, so accessories carry over between models.
A power barrow does the pushing for you. A 24V motor drives...
A power barrow does the pushing for you. A 24V motor drives the front wheel while you steer, which turns a long walk with a loaded barrow into something you can do without breaking sweat , and makes moving swim mid-session a decision rather than a chore.Every 2025 Power Porter runs our new-generation drive control unit, developed with a UK electronics specialist. It operates at 20kHz so the high-pitched whine of older motorised barrows is gone, uses slow start and stop for controlled acceleration, and cuts power the moment you release the button , useful in tight swims and when loading up. An adjustable speed dial and three reverse speeds give you full control, and quick-release connectors let the whole thing break down cable-free for the boot.
The Roamer is the all-rounder, and for most anglers it is the...
The Roamer is the all-rounder, and for most anglers it is the right barrow. It takes the classic single-wheel layout and adds smarter engineering around balance, agility and load capacity, so it handles a full session setup over rugged bank, muddy tracks and long walks without becoming a fight.It is also the most adaptable frame we make. Standard 87cm, extending to 115cm, 61cm wide and extending to 90cm, packing down to 87cm x 61cm. Side bags, drop-in bags and under-barrow storage all bolt on, so you can start with the base frame and build it out. Available with Green or Dark Kamo luggage, and as a Power Porter if you want the motor.
The Roamer Power Porter is the all-round frame with the motor fitted....
The Roamer Power Porter is the all-round frame with the motor fitted. A 24V drive on the front wheel does the work on long walks, muddy tracks and inclines, while the balanced Roamer geometry keeps it manageable when fully loaded.It runs the 2025-generation drive control unit: 20kHz operation for quiet running, slow start and stop for controlled acceleration, instant stop on button release, an adjustable speed dial that doubles as the on-off, three reverse speeds and quick-release connectors for cable-free breakdown. Supplied with battery and charger. Standard 87cm extending to 115cm, 61cm wide extending to 90cm.
Every part listed here is confirmed to fit the Glider. Wheels and...
Every part listed here is confirmed to fit the Glider. Wheels and tyres, axles and supports, frame sections, handles, legs and the smaller fittings that get lost or worn , all to original specification, so the barrow goes back to how it left the factory.Parts are not interchangeable across the whole range, and dimensions differ between models even where the part looks similar. Check the measurement given on the listing against your own before ordering. If you are not sure which part you need, send us a photo and we will identify it.
Every part listed here is confirmed to fit the Roamer. Wheels and...
Every part listed here is confirmed to fit the Roamer. Wheels and tyres, axles and supports, frame sections, handles, legs and the smaller fittings that get lost or worn , all to original specification, so the barrow goes back to how it left the factory.Parts are not interchangeable across the whole range, and dimensions differ between models even where the part looks similar. Check the measurement given on the listing against your own before ordering. If you are not sure which part you need, send us a photo and we will identify it.
Every part listed here is confirmed to fit the Stealth. Wheels and...
Every part listed here is confirmed to fit the Stealth. Wheels and tyres, axles and supports, frame sections, handles, legs and the smaller fittings that get lost or worn , all to original specification, so the barrow goes back to how it left the factory.Parts are not interchangeable across the whole range, and dimensions differ between models even where the part looks similar. Check the measurement given on the listing against your own before ordering. If you are not sure which part you need, send us a photo and we will identify it.
Every part listed here is confirmed to fit the Trident. Wheels and...
Every part listed here is confirmed to fit the Trident. Wheels and tyres, axles and supports, frame sections, handles, legs and the smaller fittings that get lost or worn , all to original specification, so the barrow goes back to how it left the factory.Parts are not interchangeable across the whole range, and dimensions differ between models even where the part looks similar. Check the measurement given on the listing against your own before ordering. If you are not sure which part you need, send us a photo and we will identify it.
The Stealth is the lightest and most streamlined barrow we build. It...
The Stealth is the lightest and most streamlined barrow we build. It is aimed at anglers who move fast and travel light: day sessions, stalking, roving on rivers, and any venue where the paths are tight or overgrown and a wide frame is a liability.Compact does not mean flimsy. It uses the same frame engineering, wheel and luggage fittings as the rest of the range, and it extends when you need it , 74cm standard, 108cm extended, 50cm wide, packing down to 74cm x 50cm. It is also the natural starting point of the range: buy the base frame and add drop-in bags, front bags and storage as your setup grows.
The Trident is our three-wheel barrow, and its advantage is simple: you...
The Trident is our three-wheel barrow, and its advantage is simple: you never lift it. The triple pneumatic wheel setup carries the whole load on the ground, so rutted tracks, gravel and wet sloping banks stop being a balancing act and become a walk.It is built for the longer, gear-heavy sessions , a heavy-duty frame that takes big loads without losing manoeuvrability. Standard 87cm, extending to 115cm, 61cm wide extending to 90cm, packing down to 87cm x 61cm. Available in Green and Dark Kamo luggage variants, and as a Power Porter.
The Trident Power Porter combines the three-wheel frame with a 24V drive,...
The Trident Power Porter combines the three-wheel frame with a 24V drive, which is about as easy as moving a heavy load gets. Nothing to lift, nothing to balance, and the motor doing the pushing over rutted tracks, gravel and wet banks.Built for long, gear-intensive sessions with a heavy-duty frame and triple pneumatic wheels. Fitted with the 2025 drive control unit , 20kHz quiet running, slow start and stop, instant stop, adjustable speed dial, three reverse speeds and quick-release connectors. Supplied with battery and charger. Standard 87cm extending to 115cm, 61cm wide extending to 90cm.
Not every session needs a motor. An unpowered carp barrow is lighter,...
Not every session needs a motor. An unpowered carp barrow is lighter, simpler, cheaper to run and quicker to strip down for the car , and for day sessions, short walks or venues with decent paths, it is often the better tool.Our manual barrows use the same frames, wheels and luggage fittings as the powered models, so nothing is compromised on build quality. Choose a compact single-wheel barrow for tight swims and stalking, or a three-wheel frame if you carry a full bivvy setup and want to load and unload without balancing anything. Every model accepts the full Carp Porter luggage range, and most can be converted to power later with a bolt-on conversion kit.
